Maker Pro
Maker Pro

block diagram

Upender

May 13, 2018
2
Joined
May 13, 2018
Messages
2

The 48V DC load periodically (frequency is 1 Hz) switches on and consumes 20 A current for 100 ms.
0


The primary energy source is 270 V DC.
A block diagram with black boxes and components necessary (converters, inductors, resistors, capacitors, switches etc) is expected.

2.Using some components i would like to draw a block diagram to fulfill the following requirement

  • Vin=230VAC; Vout1=48V 300W DC; Vout2=3.3V 100W DC

    Could someone please help me out to draw a block diagram
 
Last edited:

Upender

May 13, 2018
2
Joined
May 13, 2018
Messages
2
Its an assignment but not getting an idea how to proceed further
 
Top