Connect with us

BLDC free wheeling

Discussion in 'Hobby Electronics' started by Fat Crack Ho, Sep 24, 2003.

Scroll to continue with content
  1. Fat Crack Ho

    Fat Crack Ho Guest

    I'm having a bit of trouble getting a motor to freewheel. If I turn off all six
    fets while the motor is running at full speed, the motor just locks up. I have
    to reset the controller to get it to operate again. The controller and motor
    are operated from separate supplies, so I can't see why the controller would
    drop out.

    Any ideas?

    thanks.
     
  2. Guest

    Can you post the schematic of the motor controller to alt.binaries.electronic.schematic
     
  3. Guest

    oops, wrong ng.

    alt.binaries.schematics.electronic
     
  4. I'm thinking free wheeling diodes perhaps, but then again.....What are you
    using for snubbing, or have you not followed the advice from previous
    posts??
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-