Maker Pro
Maker Pro

Biopotential Biofeedback Data Acquisition

S

Scott

Jan 1, 1970
0
Biopotential Biofeedback Data Acquisition
DataQ Data Acquisition Custom Software
DataRecoderPro Ver.1.6
1 to 32 channels, Serial or USB
4 Trigger Modes (Norm, Analog, Digital, Software)
Adjustable Trigger Levels (Pre, Post, Slope)
Over 35 DataQ Devices Supported
(Preprogrammed Port and Drivers)
Plus custom Port / Drivers
0-15 Plot bits + Analog
Switchable Digital Input / Outputs
Record / Playback Modes
Record WaveForms for later Study.
Forward / Backward and Step Modes
Adjustable Trigger Modes
Channel and Burst/Event/Sample modes
Auto Scrolling charts
(4 channels Time / 32 Channels)
Adjustable Sample, Burst, Event
Plus Much More !
Very Easy to Use (Mouse tips)
Custom Developed Versions
Custom chart Labels and functions
Paypal Accepted, Download link
http://binaural.info/dataq/dataq.htm
Visit DataQ Home site
www.dataq.com
Or there support forum
http://support.dataq.com/


In case anyone's interested in measuring biopotentials, I was able to
get the DI194RS sensitivity down in the MV range runing a 3 bit plot
offset with the below application, see jpg and or web site. The waves
graphed (2nd part of charts), are from touching the solder joints on
the DI194RS below the screw terminals (Body noise (60 HZ)), moving my
finger aounrd to different channels, no noise was present when not
touching anything (Good common mode rejection). and there was no
channel isolation problems, See app at : <http://binaural.info/dataq/
dataq.htm>
Keywords : biofeedback chart recoder eeg ekg ecg biopotentials
Acquisition
data software computer grass amplifier
 
Top