Connect with us

BH Pioneer Pro treadmill

Discussion in 'Troubleshooting and Repair' started by mmp1984, Mar 7, 2016.

Scroll to continue with content
  1. mmp1984

    mmp1984

    1
    0
    Mar 7, 2016
    Good evening.

    I have a BH pioneer pro treadmill with a Endex DCMD67M board with problems. I think there is a short circuit. It has been changed grinder and a few more pieces transistor) . The engine has been seen and is working well . when i press start button the belt doesn t move and gives E1 error. ANY HELP?
     
  2. KTW

    KTW

    273
    15
    Feb 22, 2015
    Has someone worked on this and couldn't get it working after replacing parts?
    What's a grinder in a treadmill?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-