Connect with us

Beko Chassis PT92 ---- help needed

Discussion in 'Electronic Repair' started by Gerald Spindler, Jul 22, 2003.

Scroll to continue with content
  1. hi,

    i have a PT92 chassis here which wont come up anymore.

    synthoms:

    came in with dry joint at CD021 47nF and by228 was short, a replacement of
    cd021 and the BY228 didnt cure the fauslt, BY228 is foing short all the
    time.

    set comes up with 5 sec. HV and then switches into protection....

    capasitors,resistors,diodes are all checked in the H-Line..

    has anybody a tip for me please?!

    thx
    gerald
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-