Connect with us

beko 6bz190-03 tv help needed ID burned components

Discussion in 'Electronic Repair' started by b, Jun 1, 2004.

Scroll to continue with content
  1. b

    b Guest

    This tv is a supermarket cheapie model: PLAYSONIC 14B3M03.
    Board is Beko 6bz190 - 03.

    Power supply has resistors R906 and R911 burned, utterly toasted. Also
    chopper T901 burned up (P8NA6 then 3 more figures). Anyone tell me the
    values of these components? I know these tvs are commonly sold around
    the Uk and Europe but under all kinds of names like: SEG, Bush,
    Matsui, Blue sky etc etc. (with boards like Vestel 11AkXX or Beko)but
    I can't find any info on this particular one. Any suggestions greatly
    appreciated.

    regards, Ben
     
  2. b

    b Guest

    Discovered chassis is simlar to Beko 12.1 value of R906 is, according
    to that schema, 15R . BUT: psu controller chip is different (not a tda
    16846 as listed, but in my case a MC44603ap) and also there is NO R911
    on the 12.1 schema. (On my set this goes between the negative of the
    main filter cap and to (I believe) pin 6 on the MC44603AP). Anyone
    know this chassis?
    any suggestions on how to proceed from here?!
    Thanks, Ben
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-