Connect with us

Behringer V Verb

Discussion in 'Electronic Repair' started by Ron(UK), Feb 8, 2007.

  1. Ron(UK)

    Ron(UK) Guest

    Hi chums

    I have a Behringer rev2496 that`s playing up, Last night it wouldn`t
    intitialise, stopping with a flickering display and all leds lit,
    switching off and on, and doing a factory reset didn`t help.

    Today on the bench, it had the same symptoms, with some wierd looking
    voltages around the connector from the psu to the main panel. after
    probing around with a meter, it suddenly fired up and is working. It`s
    out of warranty and frankly not worth spending much time on. I`ve
    already replaced the unit with a TC M350 which is a far superior device
    anyway.

    Questions are, has anyone had this problem? and does anyone know what
    the output voltages from the psu are sposed to be?

    Ron(UK)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-