Connect with us

Battery connection with PCB

Discussion in 'Troubleshooting and Repair' started by [email protected], Mar 22, 2014.

Scroll to continue with content
  1. ssomnath678@gmail.com

    [email protected]

    3
    0
    Dec 27, 2013
    Hi All,

    How to get constant power from battery as battery is constantly depleting and it's voltage and current drops out.

    Could you please suggest me schematic for battery connection to get continuous power till the time battery voltage drop to cutoff voltage.

    Looking forward for your help.
    Thanks.
     
  2. jpanhalt

    jpanhalt

    426
    4
    Nov 12, 2013
    Look up "voltage regulator." Generally, you will need a battery voltage higher than the circuit operating voltage; although, there are so-called "boost" regulators that provide a voltage higher than the battery is capable of providing.

    John
     
  3. ssomnath678@gmail.com

    [email protected]

    3
    0
    Dec 27, 2013
    Hello John
    Thanks for reply.
    I don't need higher voltage than battery.
    I am looking for circuit which i can use with battery so that once battery is discharging then circuit will boost the power so that output power will be maintained throughout the battery operation. i am using li-ion 3.7V battery.

    Thanks in advance.
     
  4. jpanhalt

    jpanhalt

    426
    4
    Nov 12, 2013
    What voltage does the circuit need?

    John
     
  5. ssomnath678@gmail.com

    [email protected]

    3
    0
    Dec 27, 2013
    PCB need 3.7V.

    Som
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-