Maker Pro
Maker Pro

battery charging questions

sieski

Oct 23, 2015
1
Joined
Oct 23, 2015
Messages
1
I have a 8.4v 3000mah ni-mh battery pack for an rc car that is charged by a 9.8v 0.25 charger adaptor.

The charger has died. The battery pack states charge at 3 amp or less.

Question is, whats the minimum and maximum voltage I can use to charge this pack as none of the chargers available match this voltage and amperage exactly. WOuld I need more amps the bigger voltage I used or not?
 
Top