Connect with us

Battery Charger Temperature Cutoff

Discussion in 'Electronic Basics' started by Joe, Jul 23, 2007.

Scroll to continue with content
  1. Joe

    Joe Guest

    I built a NiMH charger based on the Maxim 712 chip some time ago.

    I didn't implement the temperature cutoff part of the chip's capability,
    and now would like to do that.

    Here's the main question:

    How much above ambient temperature should the cutoff be?

    Thanks.

    --- Joe
     
  2. Depend how to measure batteries temperature, but battery itself should
    not going much over 50 degree Celcius in charging process - read battery
    makers datasheet for more precise info!
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-