Connect with us

Basic power supply design question

Discussion in 'Electronic Design' started by Steve, Jun 5, 2007.

Scroll to continue with content
  1. Replace the 1N914 with an LED.



    Best regards,
    Spehro Pefhany
     
  2. Steve

    Steve Guest

    Wow. See, I told you I wasn't an engineer. Thanks!
    Steve
     
  3. JackShephard

    JackShephard Guest

    No you are a slurping retard.

    Quit posting for free advice cheapskate.
     
  4. D from BC

    D from BC Guest

    I should set up a paypal account to accept donations from here..
    Please donate to D from BC.. I need to buy some electronics books.. :)
    D from BC
     
  5. JackShephard

    JackShephard Guest


    Nice forgery, Lamey The ForgeTard.

    Fucking get a life, you retarded twit.
     
  6. Alex

    Alex Guest

    BUT don't you forget ... you have to apply a small stable voltage at
    the input to get an output at a certain voltage...
    And a DC coupled amp will have a feedback to prevent DC on the
    output...
    Alex
     
  7. D from BC

    D from BC Guest

    On Wed, 06 Jun 2007 10:34:19 -0700, Alex

    {snip]
    There's some nice Vref IC's available. That's the input signal..
    huh?..lost me on that..

    D from BC
     
  8. Marra

    Marra Guest

    Work it out for yourself, thats even more fun !
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-