Connect with us

Basic Frequency SynthesizerQuestion

Discussion in 'Electronic Basics' started by Sommes, Oct 31, 2004.

Scroll to continue with content
  1. Sommes

    Sommes Guest

    If I put a SN7490(divided by five) IC in a Frequency Synthesizer PLL
    cirucit. Is it equal to input frequency * 5?

    Cheers
     
  2. dB

    dB Guest

    The output of the chip, using just the divide by 5 section, will be
    one fifth of the input frequency, not 5 times.
    Your good health.
     
  3. Bob Masta

    Bob Masta Guest

    If you put it between the output of the VCO and the
    reference input of the phase comparator, then the
    VCO output frequency will be 5 times the frequency
    on the external input to the phase comparator, on
    average. The output of the divider will be 1/5 of the
    VCO output and will equal the external input.


    Bob Masta
    dqatechATdaqartaDOTcom

    D A Q A R T A
    Data AcQuisition And Real-Time Analysis
    www.daqarta.com
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-