Connect with us

Barrel jack on playstation VR

Discussion in 'Troubleshooting and Repair' started by geefunkadelic, May 9, 2020.

Scroll to continue with content
  1. geefunkadelic

    geefunkadelic

    1
    0
    May 9, 2020
    https://imgur.com/g0mM06E

    https://imgur.com/ZOsTLAz
    As you can see, comparing the two images above, the barrel jack on my PSVR is missing the inner circle sheath (gonna call it this through my lack of knowledge) and is exposing two prongs (pins, whatever they are). Apparently the power supply cable sits in there fine and it works (haven't test this as it has been given to me by a friend who is clueless to this defect I'm presenting to you and I haven't got a power supply myself to try it).

    My question is, if the power supply fits in snug and the two prongs don't bend out of shape, will this be okay to use?

    Please feel free to let me know if this is posted in the wrong category and direct me as to where I should post it. Thank you.
     
  2. Bluejets

    Bluejets

    4,833
    1,014
    Oct 5, 2014
    The two prongs are the circular inner connection only totally wrecked and missing the insulation sleeve.
    Could cause a short when you plug in the power unit, who knows.
    All that is known is it's defective.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-