Maker Pro
Maker Pro

bang & olufsen oaf

J

jds

Jan 1, 1970
0
I have a Beosystem 2500, radio, CD and tape player combo. Today I
lightly dusted the head with a very soft brush. Also ran a TDK dry
headcleaner tape through. Now, when I put in a tape, it engages and
the immediately disengages. I can still fast forward and reverse. Any
thoughts (other than I shouldn't have dusted anything!)? Thanks.
 
S

Sam Goldwasser

Jan 1, 1970
0
I have a Beosystem 2500, radio, CD and tape player combo. Today I
lightly dusted the head with a very soft brush. Also ran a TDK dry
headcleaner tape through. Now, when I put in a tape, it engages and
the immediately disengages. I can still fast forward and reverse. Any
thoughts (other than I shouldn't have dusted anything!)? Thanks.

Do you have the cover in place? Room light might confuse it.

Else, you must have done something else by accident.

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header is ignored.
To contact me, please use the feedback form on the S.E.R FAQ Web sites.
 
M

Mark D. Zacharias

Jan 1, 1970
0
Sam Goldwasser said:
Do you have the cover in place? Room light might confuse it.

Else, you must have done something else by accident.


Or just a coincidence. The piece is old enough just to have developed
another problem, and the B&O decks were hardly reliable after a certain age.
Belt, motor, idler, lubrication, the usual.

Mark Z.
 
Top