Connect with us

Baluns for video

Discussion in 'Electronic Basics' started by bdooley, Feb 23, 2004.

Scroll to continue with content
  1. bdooley

    bdooley Guest

    The baluns for video on the market are recockulasly priced ($20 to
    $100). Am I wrong to believe that this is a simple device that should
    cost about $1. I know for a fact that I can get a 75 ohm to 300 ohm
    for a buck or so - is it the quaility needed for video or is just
    greedy companies selling to unaware people.

    Does anyone know where to find a good and cheap balun for video( 75
    ohm to 100 ohm) BNC to terminal block would be great but I will adapt
    as needed.
     
  2. Dbowey

    Dbowey Guest

    dooley posted:
    A TV band balun is simple compared to a video balun. It may be better for you
    to make a balun for the impedances you want, with active components rather than
    large inductors. Your video balun will need to span DC to around 4 MHz.

    Don
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-