Connect with us

ballancing of cyclon cells?

Discussion in 'Beginner Electronics' started by Otto Sykora, Feb 12, 2007.

Scroll to continue with content
  1. Otto Sykora

    Otto Sykora Guest

    Does anybody have an experience with ballancing of lead acid cyclon

    I have well done charging circuit, which however works only on the 12V
    batter ypacks of the cyclon cells. Since they go out of sync regarding
    capacity and impedance after some time, I would like to add something
    simple to the battery packs which I am to build next , where some
    basic ballancing of the cells is included.

    Cells are 4.5Ah version, charging current mostly only less then 50mA,
    discharging can take 100uA to sometimes peak 2A.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day