Connect with us

Bad LCD ? Bad microcontroller ? Or what ?

Discussion in 'Microcontrollers, Programming and IoT' started by tonny, Jan 27, 2016.

Scroll to continue with content
  1. tonny

    tonny

    5
    0
    Aug 10, 2015
    So i recently bought an arduino along with lcd module and 2 extra atmega328p-pu ,yesterday it was working just fine then i disconnect everything and reconnect it and this happen ,what could possibly go wrong ?

    setup:http://s1072.photobucket.com/user/T...[user]=143082917&filters[recent]=1&sort=1&o=2

    with microcontroller that came with the board:http://s1072.photobucket.com/user/T...[user]=143082917&filters[recent]=1&sort=1&o=0

    with microcontroller i purchase separately:
    http://s1072.photobucket.com/user/T.../20160128_012325_zpslavooxa2.jpg.html?filters[user]=143082917&filters[recent]=1&sort=1&o=1
     
    Last edited: Jan 27, 2016
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,412
    2,780
    Jan 21, 2010
    A wire may have come loose, you may have faulty software, or any other manner of things may have happened.

    Try downloading a simple LED flasher program to the arduino to verify that nothing really bad has happened to that.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-