Connect with us

B&G wirings

Discussion in 'Boat Electronics' started by PeppeC, May 23, 2004.

Scroll to continue with content
  1. PeppeC

    PeppeC Guest

    I have an autopilot Raymarine ST4000+ installed on my sail boat and a B&G
    Network for speed and wind direction. I'm trying to send the NMEA data from
    B&G to the ST4000. On the B&G instrument the output is a simple five holes
    DIN connector. I've searched around for the wirings of this plug but it
    seems the best kept secret (or I'm getting too old for this stuff).

    Where could I find the description of the plug (without having to bring an
    oscilloscope in the cockpit)?

    Many thanks
    Giuseppe
     
  2. Try or ring 954-229-0208. They should be able to help
    you.
     
  3. Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-