Connect with us

[avr] dual pins - waveforms

Discussion in 'Electronic Design' started by pv, Feb 26, 2007.

Scroll to continue with content
  1. pv

    pv Guest


    I have question.
    I need remove active RSTDISBL bit attiny2313 in my own parallel
    programmer (for AT89 - LPT).
    How understanding it, that one pin attiny2313 appointed as XA1/BS2
    (ATtiny2313 Preliminary Complete - Figure 69 - Parallel Programming)
    appear later as two various signals on Figure 73 (Programming the FUSES
    Waveforms) ?
    This refer also BS1/PAGEL pin.
    I not know how to write procedure canceled this bit - RSTDISBL.

    Thank you. Pawel
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day