Connect with us

Auto Dialer

Discussion in 'Security Alarms' started by rda, Mar 5, 2004.

Scroll to continue with content
  1. rda

    rda Guest

    Hi guys, tomorrow I am going to have a go at installing an auto dialler to a
    friends alarm. The dialler has either normally closed or normally open
    connections that go to the alarm panel. Unfortunately Im not sure where
    these should go in the panel. The panel is branded as YALE but I have no
    further information than that, my friend is pretty sure that he has the
    engineers code so hopefully the bell wont go off when I open the system.
    Does anyone have any idea what terminals I should be looking for to trigger
    the dialler?

    Any help will be much appreciated.


    TIA
     
  2. Aegis

    Aegis Guest

    What brand and model dialer?
     
  3. rory

    rory Guest

    is it an AD-2000 type dialer?
    If I remember I used the siren output, and the included resitors on
    the dialer's power trigger itself, so when the alarm went off it
    triggered the dialer to call out, its been around 8 months since i
    installed it but thats what I remember doing.
     
  4. rda

    rda Guest

    Hi there, the alarm is a YALE HSA 2500 wireless and the dialler is a MOSS
    MS150 which takes a micro cassette.

    --
    rda
     
  5. Aegis

    Aegis Guest

    I can't find any reference to a Moss MS150 dialer anywhere... Can't be of
    much help to you...

     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-