loobieburt
- Sep 27, 2011
- 5
- Joined
- Sep 27, 2011
- Messages
- 5
If i had a computer type non powered microphone am i correct in thinking i need a pre amp and an amplifier to feed it into a mixer to mix over an cd playing music?
If so does anyone know of a good reliable preamp/amp possible in one circuit that would be suitable?
I have got a pre amp circuit and an TDA 20w amplifier but the TDA gives off so much heat it distorts when too hot. I know a reasonable heatsink would be better but space is limited.
ANy advice would be much appreciated.
If so does anyone know of a good reliable preamp/amp possible in one circuit that would be suitable?
I have got a pre amp circuit and an TDA 20w amplifier but the TDA gives off so much heat it distorts when too hot. I know a reasonable heatsink would be better but space is limited.
ANy advice would be much appreciated.