Connect with us

ATX PSU PWM chip

Discussion in 'Electronic Repair' started by Markus L, Jul 22, 2005.

Scroll to continue with content
  1. Markus L

    Markus L Guest

    Would like to modify a 250W ATX PSU to 13.8V and use it to power ham radio
    gear.
    There's quite a bit of helpful info available on the net, but I haven't
    found any data on the PWM controller IC used which is marked HP1001WA-1. The
    IC package is a DIP14, the PSU itself is a Dell HP-P2507F3CP.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-