Connect with us

Attaching a Ultrasound HC-SR04 unit

Discussion in 'General Electronics Discussion' started by 8bit, Feb 10, 2016.

Scroll to continue with content
  1. 8bit

    8bit

    97
    3
    Oct 30, 2013
    I have a Ultrasound HC-SR04 unit which has tiny holes in each corner for screws/bolts. Can someone tell me the type/size of fixings I will need to attach it to my project? Thanks.
     
  2. 73's de Edd

    73's de Edd

    3,063
    1,299
    Aug 21, 2015
    .


    Sir . . . . . .8bit

    (What ? you haven't progressively upgraded to 128 bit. . . . . .you have been loosing some serious crunch power in the interim.)

    Strange . . . but those two diagonally oriented, same size holes, could accommodate at least 4 different digressing gauges of fasteners sizes.

    Not knowing your projects mechanical situation, leaves limitless possibilities.

    Click on and then travel on in to the sourcing info of all of these potential utilization's of that unit , and take a look-see at what might be most applicable to yours.

    https://www.google.com/search?q=ultrasonic+hc-sr04+fritzing&newwindow=1&tbm=isch&imgil=dZkJWHyp9W_0BM%3A%3B9XshoKNejXL79M%3Bhttp%253A%252F%252Farduinobasics.blogspot.com%252F2012%252F11%252Farduinobasics-hc-sr04-ultrasonic-sensor.html&source=iu&pf=m&fir=dZkJWHyp9W_0BM%3A%2C9XshoKNejXL79M%2C_&biw=1745&bih=890&usg=__NkWPFgzdaoetxeglpPoGXxKxqwo=&ved=0ahUKEwiT5sL13e3KAhVIOCYKHXtTBnwQyjcIVw&ei=C3W7VtO0BsjwmAH7ppngBw#imgrc=_&usg=__NkWPFgzdaoetxeglpPoGXxKxqwo=



    Aside:

    ???
    Do duly take note of the "Porcelain Throne " . . . .centrally . . . .about 39 lines down.






    73's de Edd

    .
     
    Last edited: Feb 10, 2016
    8bit likes this.
  3. 8bit

    8bit

    97
    3
    Oct 30, 2013
    Many thanks 73' appreciate the reply and will check it out. :)
     
  4. 8bit

    8bit

    97
    3
    Oct 30, 2013
    Ah no I was actually talking about physically attaching the the sensor to my project. :)

    I could hot glue it but I don't have a glue gun so was looking at the small holes on the sensor itself.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-