Connect with us

ATMEGA88 low parts programmer

Discussion in '8bit Microcontrollers' started by Mr G, Aug 10, 2008.

Scroll to continue with content
  1. Mr G

    Mr G Guest

    Im just wondering if anyone can be in the right direction for a hardly no parts Atmega 88 serial programmer. I've found plenty of basic parallel port ones and ISP serial ones, but haven't been able to find one that just solely programs the atmega88 out of circuit with minimal parts.
     
  2. Rich Webb

    Rich Webb Guest

    Perhaps I don't understand the question, but isn't the only difference
    between an in-system programmer and one that works "out of circuit" that
    the out of circuit programmer would need to provide Vcc, GND, and CLK?

    The ATmega88 datasheet gives a complete description of the serial
    programming sequence.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-