Maker Pro
Maker Pro

atm to cellular?

M

ml

Jan 1, 1970
0
hi

i need to soon work with some atm machines that have buit in modems
minibank 1500

not sure if i can get to the serial port or if the modems are
integrated nor am i sure even if i get to the serial port driving
that modem if the commands out would be 'industry standard'

but wondering if anyone might have any such experience or a link with
info on above?

basically i need to replace the pots/fxs phone lines with a cellular
modem

i am aware of one or two but they cost around 600 to 800 and was
looking for some alternatives

if i found a cheep iden or cdma analog fxs adapter that might be a
solution, or if i could get to the minibanks serial port i could use a
much cheeper iden or cellular modem


any tips appreciated thanks
 
R

Ryan Weihl

Jan 1, 1970
0
ml said:
hi

i need to soon work with some atm machines that have buit in modems
minibank 1500

not sure if i can get to the serial port or if the modems are
integrated nor am i sure even if i get to the serial port driving
that modem if the commands out would be 'industry standard'

but wondering if anyone might have any such experience or a link
with info on above?

basically i need to replace the pots/fxs phone lines with a cellular
modem

i am aware of one or two but they cost around 600 to 800 and was
looking for some alternatives

if i found a cheep iden or cdma analog fxs adapter that might be
a solution, or if i could get to the minibanks serial port i could
use a much cheeper iden or cellular modem


any tips appreciated thanks

Hi, the motorola i700 can be used that way with a serial cable.
I used it with a laptop to get on the internet from remote locations.
that was with motorola MIKE models.
rw

--
 
M

ml

Jan 1, 1970
0
hi

i need to soon work with some atm machines that have buit in modems
minibank 1500

not sure if i can get to the serial port or if the modems are
integrated nor am i sure even if i get to the serial port driving
that modem if the commands out would be 'industry standard'

but wondering if anyone might have any such experience or a link
with info on above?

basically i need to replace the pots/fxs phone lines with a cellular
modem

i am aware of one or two but they cost around 600 to 800 and was
looking for some alternatives

if i found a cheep iden or cdma analog fxs adapter that might be
a solution, or if i could get to the minibanks serial port i could
use a much cheeper iden or cellular modem


any tips appreciated thanks

Hi, the motorola i700 can be used that way with a serial cable.
I used it with a laptop to get on the internet from remote locations.
that was with motorola MIKE models.
rw

--[/QUOTE]

appreciate the post, but not sure if i can get to the serial ports
in the machines i assume not



I am aware if i can get serial, the iden units can do CSD /out via
serial out of the phone to another serial device

i guess don't have serial out of the device i have pots i am likely
to be stuck to interface with

so was hoping to find some low cost serial/iden to pots adapter
 
J

JosephKK

Jan 1, 1970
0
Hi, the motorola i700 can be used that way with a serial cable.
I used it with a laptop to get on the internet from remote locations.
that was with motorola MIKE models.
rw

--

appreciate the post, but not sure if i can get to the serial ports
in the machines i assume not



I am aware if i can get serial, the iden units can do CSD /out via
serial out of the phone to another serial device

i guess don't have serial out of the device i have pots i am likely
to be stuck to interface with

so was hoping to find some low cost serial/iden to pots adapter[/QUOTE]

PCCA Std. 101 covers the AT command set for CDPD and GPRS wireless
modems. Except for the wireless extension it is the same as normal.
 
Top