Connect with us

Asking help about MC101 gas sensor

Discussion in 'Sensors and Actuators' started by iman_d, Feb 16, 2012.

Scroll to continue with content
  1. iman_d


    Feb 16, 2012
    I want to work with MC101 methane gas sensor but I dont have any proper circuit to start with.I would appreciate help from anyone who have worked with mc101 or have information about it. I must add that i intend to read sensor's output using ATmega16 microcontroller.
    If it is possible please suggest a circuit.
    it is very important fo me.Please help.
    Last edited: Feb 16, 2012
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day