Connect with us

ASI "Class Act" SPA Pack Diagrams?

Discussion in 'Electrical Engineering' started by John McGaw, Aug 15, 2004.

Scroll to continue with content
  1. John McGaw

    John McGaw Guest

    I'm planning to repair a friend's spa but because it has been tinkered with
    already I'm going to need to check out the internal wiring in the control
    pack to assure myself that I'm leaving it in safe condition. The pack is an
    ASI "Class Act" manufactured in 1999 and I cannot find diagrams or even the
    address and contact information for the manufacturer. Anybody have an idea
    how I might contact them? They seem to hide themselves VERY well and even
    though I'm usually pretty good at researching such things I've come up with
    nothing so far.

    I'm especially interested in how the pressure interlock is supposed to
    be wired. The wires from that have been pulled off. I know that I'm going to
    have to replace the heating element because one terminal has burned/corroded
    off as well as the wire that was connected there. The heating element is
    "good"
    in that it has the proper resistance and is not shorted to ground but there
    is
    just no way to connect to it to support 6kW.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-