Connect with us

Arduino Pro Mini has many faces

Discussion in 'Microcontrollers, Programming and IoT' started by Vagulus, May 17, 2018.

  1. Vagulus


    May 6, 2018
    I have planned on using an Arduino Pro Mini in my project. This has meant the creation of a Symbol and a Footprint for the beastie in KiCad. All okay (except that you need to be aware of pins A4-A7 - A4 doubles as SCL and A5 as SDA and these van be important - note that none of these will fit on a breadboard). However :eek: be aware that Pro Minis come in a variety of disguises. Check these out:
    It seems that the recipe for using a Pro Mini in your project starts with, "First catch your Pro Mini ..."
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    Caveat Emptor
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day