Connect with us

ARDUINO INTERFACING WITH LCD

Discussion in 'Microcontrollers, Programming and IoT' started by sakshi, Nov 22, 2015.

Scroll to continue with content
  1. sakshi

    sakshi

    3
    0
    Nov 22, 2015
    hii everyone
    i am making a project on women safety device
    i have made a transmitter and receiver section
    i have sent the gps location from tha Tx to Rx.
    now the Rx output has been given to a DECODER to decode it
    now i have connected an ARDUINO UNO to the DECODER output.
    now the poblem is.....how will i know what data i have given to ARDUINO UNO before i display it on the LCD
    i cant give my data directly to the LCD
    HELPPPP:(
     
  2. Arouse1973

    Arouse1973 Adam

    5,165
    1,087
    Dec 18, 2013
    Hello, Sakshi, welcome to EP. What data is it you want to send to the LCD?
    Adam
     
  3. sakshi

    sakshi

    3
    0
    Nov 22, 2015
    hii adam
    thanku
    actually i m sending a digital data....the output of decoder is sent to the arduino
    4 pins of decoder connected to ardiuno
     
  4. sakshi

    sakshi

    3
    0
    Nov 22, 2015
    i want to send the location of the person using the device
    the latitude and longitude of the location should be displayed on the LCD
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-