Connect with us

Aoyue 936 Soldering Station

Discussion in 'General Electronics Discussion' started by rinthesun, Jul 18, 2010.

Scroll to continue with content
  1. rinthesun

    rinthesun

    1
    0
    Jul 18, 2010
    There is a review on Amazon about this unit that says that the iron get to hot to hold after 10 min. Does anyone have a 360 and does you unit have this problem? Maybe he had a defective unit.
     
  2. NickS

    NickS

    367
    0
    Apr 6, 2010
    I use a pair of Metcal irons. And the handles will occasionally become to hot to hold. But it always takes longer than 10minutes. Usually I wont notice the problem until they have been on for a few hours.

    I am not sure about the iron you are looking at but that is my 2 cents.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-