Anyone tried Custom PCB in Malaysia for Protos ?

Seeing as I'm seriousl;y grumpy at BEC for stinging me $100 or so for
courier on my last board job (the same DHL guy that brings similar
sized packages to me from Polykom/Arrow/Braemac/whatever for around
$10 or so every few days) I'm thinking of giving Custom in Kuala
Lumpur a crack - they seem to make all the right noises - cheap
freight, Protel,credit card, lightning fast answer to a process
question (on a Saturday even !!!!!).
Question is : Do they make nice boards ?
Typically I do 8/8 mil DSPTH SMD - not rocket science but still
eminently stuffable uppable if not done correctly.
Opinions please...
cheers
Mike

 

Mike,
I got a little board I'd designed in Eagle made by Custom PCB. The result
was excellent, delivered quickly with no flaws and very cheap. Friendly &
helpful to deal with, I can recommend them highly. The most difficult part
of the process was the payment; done through an American intermediary that
didn't recognize my Aussie Visa numbers. Fixed after a couple of tries.
Visa gouged me on the exchange rate (paid in US$, 10% worse than the
published exchange rate) but I wasn't surprised.

cheers

Z

 

Futurlec's "commercial" production is 100+ boards.

Rudolf

 

Good grief, you've never used 'porpoises' for 'purposes'?? Lighten up.

Ken

 

Good grief, you've never used 'porpoises' for 'purposes'?? Lighten up.

** Never,meaning not ever!!!
Brian Goldsmith.