Maker Pro
Maker Pro

Anyone seen these connectors?

avalon991

Dec 28, 2011
3
Joined
Dec 28, 2011
Messages
3
Hi Everyone,

Has anyone seen the kind of connectors shown in the picture before?

If so, could you please reply with the part number and hopefully a supplier name?

These are 7-pin circular inserts for custom made connectors, the company we use

to buy them from went into bancruptcy and they never gave us the name of the

manufacturer or the part number :-(

Thank you very much for your help.
 

Attachments

  • PICT0360.jpg
    PICT0360.jpg
    123.2 KB · Views: 165
  • PICT0361.jpg
    PICT0361.jpg
    85.3 KB · Views: 157

OLIVE2222

Oct 2, 2011
690
Joined
Oct 2, 2011
Messages
690
Hi avalon991,

maybe knowing the product where the connectors are used can help us. It' s looks very particular sealed but not latched. Maybe others connector can match but the pin alignment is not common, also must be the same spacing, pin diameter..
Is there any marking, logo or something on the connectors or on the connectors packaging?

Olivier
 

avalon991

Dec 28, 2011
3
Joined
Dec 28, 2011
Messages
3
Hi Olivier,
Thank you for your reply.
This is used in a custom connector that we manufacture for underwater tools. The "insert" I think is originally intended to be used in underwater cameras, like for the sewer. There are no logos, no marks, no nothing, only "Made in Mexico" label when they are new and a "02270" marking, but I guess it is only the production line because this number can vary from batch to batch.
Regards,
 
Top