Connect with us

Any TopSPICE users here?

Discussion in 'CAD' started by Chaos Master, Jan 10, 2005.

Scroll to continue with content
  1. Chaos Master

    Chaos Master Guest

    Just to ask if somebody here has used the TopSPICE circuit simulator
    [1] from PENZAR Development? Is it any good?


    Chaos Master®, posting from Canoas, Brazil - 29.55° S / 51.11° W

    "People told me I can't dress like a fairy.
    I say, I'm in a rock band and I can do what the hell I want!"
    -- Amy Lee

    Running on: 300MHz Pentium, 128MB RAM, 8.4GB HD, 56k modem, Windows 98
    Mozilla Firefox 1.0, Gravity 2.70, Wget as downloader
  2. Robert Baer

    Robert Baer Guest

    I bought TopSpice Dec 1993 DOS version (mixed mode) because the price
    was right and the ad covered all i would ever need.
    Had no major problems with it; a few minor ones when the number of
    steps filled all of memory (did not crash, just complained and stopped
    the calcs).
    I very rarely need to use Spice, and so i think i may have gotten my
    money's worthout of it.
    The upgrades offered over the years were decently priced, but my
    needs/useage would justify no more than zero dollars for them.
    TopSpice has seemed to be at least as good as the fancy expensive
    versions that large companies had at the time; the mixed mode (analog
    and digital at same time) was a plus that a number of the others did not
  3. RBola35618

    RBola35618 Guest

    Topspice is a very good simulator. The latest version comes with a large
    library of parts. What you can't find in the library, you can download and
    easily inport into the simulator. I hightly recommed topspice.

    Robert B
  4. Robert Baer

    Robert Baer Guest

    I agree; it was superb many years ago when only DOS was available.
    Robert Baer (one of many)
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day