Connect with us

Antique Zenith AM/ FM model 8C01 (late 40's) Radio schematic needed.

Discussion in 'Electronic Repair' started by [email protected], Mar 4, 2008.

Scroll to continue with content
  1. Guest

    Does anyone have a schematic for this radio that they could possibly
    please share with me? Or perhaps might there be a more appropriate
    group to post this to? Thanks, Lenny
     

  2. Try Give them the Brand and Model
    numbers, as well as the symptoms, and they may be able to help.
    http://groups.google.com/group/rec.antiques.radio+phono?hl=en for google
    group users.


    --
    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
     
  3. exray

    exray Guest

    8C01 is a chassis number. I'd refer you to Nostalgia Air but that
    site doesn't necessarily recognize chassis numbers. The actual model
    number might find it. Something like a T825 perhaps?

    http://www.nostalgiaair.org/resources/458/T0000458.htm

    NA only covers the Rider's manuals up to the very early 50s and its
    sketchy in the last few years. If yours is later than that then look
    for a site with Beitmans diagrams, I think Dave Schmarder now has them
    all linked on his site.

    GL,
    Bill
     
  4. Guest

  5. exray

    exray Guest

    Doggone Zenith...they repeated that chassis number. There's one in
    the 1947 Beitmans and another in 1960. I'd guess that yours is the
    former?

    If you come up dry drop me an email and I can send you a copy.

    -Bill
     
  6. Guest

    I found the model number with the help of another guy who is more
    familiar with Zeniths than I am. He then crossed it to the chassis. As
    to year, it's pre 1948 is all it states. And NA had the schematic with
    changes and a few service notes. Time to warm up the old Senior
    Voltohmyst. This set howls and growls and I've already replaced two
    tubes and two leaky caps. One physically leaked wax all over my bench.
    Probably end up replacing them all before I'm done. If this wasn't a
    job for a friend, I don't suppose that it would be hardly worth the
    time. Thanks to everyone for all the help. Lenny Stein.
     
  7. tundrawolf

    tundrawolf

    1
    0
    Jul 31, 2009
    Hello,


    I have a Zenith radio with chassis number 8C01. I was wondering if you could share the schematic or model number with me?


    Thanks!!


    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-