Connect with us

Antenna Help

Discussion in 'General Electronics Discussion' started by kevin306, May 24, 2014.

Scroll to continue with content
  1. kevin306

    kevin306

    1
    0
    May 24, 2014
    Hi there.

    So in need of urgent help here. My project for college was finished and due for presentation Monday. I have an antenna off a GPRS device and I have lost the top of it here is the link. I lost the rectangle pcb at the top.
    http://store.openpicus.com/openpicus/prodotti.aspx?cprod=OPANTE006045
    I heard that you can run a wire from the coax and still get reception is this correct. anyone know what I need to do.
     
  2. davenn

    davenn Moderator

    13,598
    1,875
    Sep 5, 2009
    it will work but signal level is likely to be very low in comparison

    cheers
    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-