Connect with us

Analyze the 1090 MHz channel and simulation with ns-2

Discussion in 'Electronic Basics' started by Daniel Casolini, Mar 21, 2007.

Scroll to continue with content
  1. Hi all !

    I have to analyze the capacity of the 1090 MHz channel used by
    airplanes' transponders to transmit/receive air traffic surveillance
    services (such like ADS-B and TIS-B).
    ADS-B (Automatic Dependent Surveillance Broadcast) is a surveillance
    service that is broadcasted from the airplanes' transponders to other
    aircrafts in a specific area or to ground stations.
    TIS-B (Traffic Information Service Broadcast) is a surveillance
    that is broadcasted from the ground station to all the aircrafts in a
    specific range.

    - Could anyone help me to start this work?
    - What particular aspects have I to study and describe for this
    analysis? Which are the steps I have to follow to do this?
    - I have to simulate the transmission of both services using ns-2
    (Network Simulator 2, an
    implementation of the 1090 MHz standards for ns-2 already exist?

    Thank you all !



    p.s.: delete LEVAMI from email address to private reply
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day