Connect with us

Analog io Controller in DeviceNet

Discussion in 'Electronic Design' started by srinu, Mar 11, 2005.

Scroll to continue with content
  1. srinu

    srinu Guest

    Dear friends
    I am devloping Analog io controller for DeviceNet application.Here i
    am using 4 analog inputs ,4 analog out puts.Analog inputs are inputs
    of ADC ,output of ADC is input to the DAC here iam geting a analog out
    I have a doubt regarding POLL IO messages . I wanted to implement the
    Poll IO message .if master wants to send a command to my 4inputs and
    4outputs points in my device which work independent of each other. can
    any one specify me the poll I/O format for the above inputs and
    outputs which should be accomadated in 8 bytes of data .Please help me
    in this regard.

  2. Luhan Monat

    Luhan Monat Guest

    You have not said anything about what your application is. My initial
    impression is that you are trying to use some kind of large-scale
    protocol in a small-scale system.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day