Connect with us

AN: Open Instrumentation Project: Release 1.7

Discussion in 'Electronic Design' started by [email protected], Aug 20, 2007.

Scroll to continue with content
  1. Guest

    The Open Instrumentation Project announces release V1.7 of software
    for the
    Syscomp DSO-101 oscilloscope hardware.

    The Open Instrumentation Project (OIP) has been formed to support
    open-source software and low cost hardware for electronic
    Currently available instruments include an oscilloscope, waveform
    and network analyser. Source code is available at
    licensed under the GPLv2.

    Information on the hardware is available at

    In addition to bug fixes, software version 1.7 supports these new

    - XY Plot, useful for Lissajous figures or general purpose plotting
    (X-T waveforms can appear on the same display)

    - Spectrum analysis using DFT.
    (X-T waveforms can appear simultaneously on a separate

    - High-resolution mode, capturing a full 32k samples on both
    supporting variable digital zoom and scrolling.

    - User adjustable vertical calibration for every gain setting.

    - Save data to .csv (spreadsheet) format

    - Screen capture, postscript and .jpg format

    - Save/Restore scope configuration

    The software is written entirely in the Tcl/Tk language and runs under
    Linux, Windows and Macintosh operating systems.

    An extensive user manual is part of the code package.

    Peter Hiscocks
    Syscomp Electronic Design Limited, Toronto
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day