Connect with us

Amstrad DD8900 Double-Decker VCR

Discussion in 'Electronic Repair' started by Rod Wilson, Dec 8, 2003.

Scroll to continue with content
  1. Rod Wilson

    Rod Wilson Guest

    Hi all,

    Has anyone had any experience in repairing one of these VCR's?

    I don't have a service manual and I need to replace the belts
    on both decks.

    I can easily get to the belts on the bottom deck, but was looking
    for any tips on how to access the belts on the top deck with minimal dismantling.

    Best regards

    Rod
     
  2. Sofie

    Sofie Guest

    Rod Wilson:
    No really easy way..... remove 8 to 12 screws, disconnect various ribbon
    cables and then separate the upper deck form the lower deck.
     
  3. Rod Wilson

    Rod Wilson Guest

    Hi Daniel,

    Thanks for the reply.

    Regards

    Rod
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-