Maker Pro
Maker Pro

amp repair, part ID

NCC74656

Jun 6, 2013
42
Joined
Jun 6, 2013
Messages
42
need to know if these fets and resistors are the proper replacements.

im looking at 24 resistors and 20 fets, all with the same labling. its on the power side of a 2500W Viper amp.

here are pictures of my blown ones:
AZFGUoe.jpg


and here is what im looking at replacement wise.

http://www.digikey.com/scripts/DkSe...=635604798806214543&CSRT=11423872297582443546

http://www.digikey.com/scripts/DkSe...=635604798806214543&CSRT=11423872297582443546

if they are not correct, please direct me to the proper parts. thanks.
 

davenn

Moderator
Sep 5, 2009
14,262
Joined
Sep 5, 2009
Messages
14,262
hi there

you haven't told us the part number on the transistors it looks like IRF 3205 can you confirm please :)
and what is the colour code on the resistors

Neither of your links work, both are error 404 not found

cheers
Dave
 

NCC74656

Jun 6, 2013
42
Joined
Jun 6, 2013
Messages
42
links work on my end. the fets are 3205, yes.

the resistors are red/red/black/gold
 

KrisBlueNZ

Sadly passed away in 2015
Nov 28, 2011
8,393
Joined
Nov 28, 2011
Messages
8,393
Do you know why they all failed?

Are you sure there are no other faulty or damaged components?
 

NCC74656

Jun 6, 2013
42
Joined
Jun 6, 2013
Messages
42
while I don't know for certain why it failed I suspect it has to do with the cold weather. It was negative 15 degrees and my remote starter was not working, my remote starter has a relay that disables the radio when remote started. I went out to start it with a key and the stereo was on full blast. When the stereo kicked on the app popped. When I opened the amp the FETs are shattered, half of them look like somebody took a hammer to them.I want to replace all the resistors and all the fets. The capacitors do not appear to be popped. I cannot see any visual damage on the output side of the amplifier. The amplifier itself still turns on but I do not get a power light on the side of the amp.
 
Top