Connect with us

Amateur radio classes start soon - Melbourne, Victoria

Discussion in 'Hobby Electronics' started by Mark Harrison, Sep 11, 2003.

Scroll to continue with content
  1. Amateur Radio Classes - STARTS 23rd SEPTEMBER 2003
    North East Radio Group,
    Melbourne NE suburbs, Victoria, Australia

    Be quick - Classes to help you gain a Novice license are back on again!

    A series of eleven classes held on Tuesday and Thursday
    nights run through to November when the exams will be held.

    Morse Code training is available for those that wish to
    learn it and although Morse may be dropped from the
    regulations next year, it may still be useful if
    traveling to countries overseas that still require it.

    For more details call Peter Cosway on 9379-3626

    Subjects covered include:
    Electrical Laws & Fundamentals
    Semiconductors & Valves
    Power Supplies
    Oscillators & Amplifiers
    SSB & FM Transmitters
    Antennas & Transmission Lines
    Test Equipment & Measurement
    Interference & Safety

    Briar Hill Primary School,
    Gladstone Rd (off Sherbourne Rd)
    Briar Hill,
    Melway 21-B3.

    Starting Time:
    Morse Practice: 7.30 PM
    Theory: 8.00 PM - 10.00 PM

    Cost: $120 and NERG membership.
  2. Rob Judd

    Rob Judd Guest

  3. Hi Daniel,

    The Eastern and Mountain District Radio Club (EMDRC) meets in the
    Eastern suburbs and have just finished classes for this year (in fact
    they held the exams on Saturday).

    I don't know of anyone else running classes this year but there are sure
    to be more early next year. Check out the Victorian WIA web site at for links to other groups around Melbourne that may be
    able to help out.

    If you already have a good knowledge of radio and electronics then try
    the WIA online sample exams - you may not need the classes and go for
    the exams that many of the clubs hold throughout the year.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day