Connect with us

Altium Net Length

Discussion in 'CAD' started by yy7d6, Sep 26, 2006.

Scroll to continue with content
  1. yy7d6

    yy7d6 Guest

    Hi is anyone here knows how to deal with PCB Net lengths in Altium
    Designer?
    BTW, i'm currently routing 2-DDR2 device, so i have to match the length
    of the two DDR net length.

    Thanks.
     
  2. yy7d6,
    Are you having problems with the net length matching function or you
    don't know about it?

    Contary to intuitive thought, the net length matching function must be
    run repetitively until the lengths have been matched within your tolerances.
    It doesn't run one single time and achieve the matched length in that one
    pass.

    If your question is as basic as it may appear, try reading the PDF files
    supplied along with the help files under the Help menu. The PDFs should have
    some guidance on the function itself or it may come under their instruction
    for autorouting and DRC rules generation/definition for net lengths.

    p.s. I don't currently use AD so I can't give you specific instruction on
    using it.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-