Connect with us

akai amp

Discussion in 'Electronic Repair' started by Patt, Jul 4, 2007.

Scroll to continue with content
  1. Patt

    Patt Guest

    On the back of this amp (Akai AM-V04), is two plugins. One says switched the
    other unswitched. What plug do I use to plug the tuner into it? The house
    is normal AC current wiring.
  2. "Switched" just means that particular outlet is controlled by the power
    switch on the Akai, so that the Akai can turn on the tuner at the same time,
    if you desire.
    (Assuming the tuner power switch is "On", that is...)

    Use either one, but the tuner will stay on when you turn off the amp unless
    you use the switched outlet.

    How about that... a question even I was competent to answer... ;-)

    Mark Z.
  3. Mike Berger

    Mike Berger Guest

    The unswitched outlet is meant for a turntable, which might need
    power to unload the tone arm after the amp is turned off.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day