Connect with us

Aiwa NSX 999 Mk2 music system, Microcontroller, does it need programming?

Discussion in 'Troubleshooting and Repair' started by Ram Kiran, Dec 6, 2017.

Scroll to continue with content
  1. Ram Kiran

    Ram Kiran

    2
    0
    Dec 6, 2017
    Hi
    I have a Aiwa NSX 999 Mk2 music system, the microcontroller is malfunctioning, I want to replace it, I found new ones available on internet. the Microcontroller IC number is LC866432V-5819. Does it need programming before installation, or it is preprogrammed? Please guide me
     
  2. kellys_eye

    kellys_eye

    4,275
    1,147
    Jun 25, 2010
    What makes you think this is so?

    Either way the device does have internal memory and the contents are likely to be protected so you won't be able to either read the original nor program it yourself without those details.
     
    Last edited: Dec 6, 2017
  3. Ram Kiran

    Ram Kiran

    2
    0
    Dec 6, 2017
    assigned functions for the control buttons don't engage, like if i press CD button, radio may start, or something else will happed instead of cd playing. Like that all the keys respond differently instead of assigned function. it dont happen with remote buttons. it started like that and now tape is not engaging. play rewind forward are not functioning. 18 years before cd tray used to open and close continuously and the service centre changed the microcontroller chip.
     
  4. kellys_eye

    kellys_eye

    4,275
    1,147
    Jun 25, 2010
    Sounds like the keypad multiplexing is playing up but this could be because of poor, loose or dirty connections on any of the component parts of the keys, interconnecting leads, plugs, sockets etc.

    Have you tried any other repair methods?
     
  5. blueeye26

    blueeye26

    1
    0
    Sep 2, 2020
    I have the same problem on my Aiwa NSX-999 MkII. Random functions by pressing the front buttons.
    I already checked the mainboard for cold joints but everything seems to be fine.

    Do you know which connections are responsible for that fault?

    Thanks in advance
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-