Connect with us

Aiwa Cassette Deck Belt Repair?

Discussion in 'Electronic Repair' started by David Perris, Aug 13, 2004.

Scroll to continue with content
  1. David Perris

    David Perris Guest

    Does anyone know how the drive belts are arranged
    on an Aiwa AD-F800 cassette deck?

    There are two belts, and seemingly
    three things for them to wrap around:

    --a large flywheel that drives the take-up spindle
    (and also engages the mechanism that lifts the
    heads and pinch rollers into place for playback),

    --a smaller flywheel that drives the feed spindle,

    --and the drive shaft of a small motor at the top rear
    of the transport assembly. This motor spins for a moment
    when a cassette is inserted (to take up the slack, I assume),
    and spins constantly when the deck is in Play, Rewind or Fast Forward.

    Both belts have slipped off, and
    I can't figure out how they go back.

    Thanks in advance.

    --David Perris
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-