Connect with us

Aiwa AV-D58 Receiver

Discussion in 'Electronic Repair' started by Todd, Apr 20, 2004.

Scroll to continue with content
  1. Todd

    Todd Guest

    Hello all, I own a Aiwa AV-D58 receiver that I have been very happy
    with for a few years now. Never any problems until recently.

    At first I was getting "Over Level" warnings with a lot of clipping
    and loud intermitent static. I attributed it to the input volume and
    lowered all of the settings. Success until tonite. Now I have been
    getting the same symptoms although alot more frequently and any
    attempts to quiet them is futile. I finally unplugged everything and
    hooked the VCR up to AUX 1 with 1 mono line so my son could watch
    cartoons! That has done the trick for now....

    I have tried resetting, allowing the receiver to cool down (although
    no signs of overheating), eliminating all but one speaker at a time,
    input volumes, different volume configurations etc.

    Question...Any ideas what may be causing the problem and secondly I
    just ordered a service manual online, am I getting in over my head by
    hoping to fix anything myself???


    Thanks in advance - Todd
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-