Connect with us

AIR-X wind generator - an update

Discussion in 'Home Power and Microgeneration' started by JERD, Nov 2, 2007.

Scroll to continue with content
  1. JERD

    JERD Guest

    To those who may have been following the original posting on the Air-X this
    is an update. While I am yet to hear back from the manufacturers technical
    assistance department of some 2 weeks ago now (I have given up on them by
    the way!) I have made contact with someone who is extremely knowledgeable on
    the Air-X.

    The answer to the problem of blades being furry/prickly as the result of the
    casting/die process is to use some light grade 'wet & dry' and smooth out
    the rough spots. This will make an improvement in the airfoil shape and
    operation of the unit.

    Go the true airfoil (smooth)!!

    I knew my pilot's training did not go to waste even if the Air-X has nothing
    to do with airplanes.

    JERD
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-