Connect with us

Ademco VIP 4286

Discussion in 'General Electronics Discussion' started by Jroelle3, Oct 5, 2012.

  1. Jroelle3

    Jroelle3

    1
    0
    Oct 5, 2012
    I have a VIP 4286 on a Vista 10 board. Everything works on the on premiss phone but when I call from an off premiss phone the phone disconnects after hitting 9#. The on premiss phone is still connected and controlling system but it should be reversed. Disconnect on premiss and seize line for the off premiss. I know I went through this when I set up my Vista20 but forgot what I did to correct it. I tried different variations of wiring the RJ31X and also bypassing it and reversing 3 and 4 but still the same. Any suggestions? Thanks Jerry
     
  2. davenn

    davenn Moderator

    13,246
    1,745
    Sep 5, 2009
    hi Jerry
    welcome to the forums

    moved you post to a more appropriate area of the forum :)

    I personally cant help with alarm stuff but there are several members with experience in that field. Hopefully one of them may be able to help you out

    cheers
    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-