Maker Pro
Maker Pro

addlink radio modul b868

J

jan

Jan 1, 1970
0
Hallo

Is there someone who has successfully used the addlink radio modul
b868.
I have connected the modul to the PC- serial interface like described
in the datasheet using an icl 232cpe
converter. When i start the communication by sending '+++' the modul
doesnt answer.
The terminal settings i have used are 8N1 19200 baud.
I have checked the signals on RXD at the modul and it seems to be
correct.
I also created a second circuit with another b868 modul with the same
result.
May be the circuit in the technical documentation isnt correct.
Unfortunately I can't get support from addlink because the company
isolvent.
Is there someone, who has made a succesfully connection to these
modul.

Sorry for double posting. Please answer in comp.modem

Thanks

Jan
 
Top