Connect with us

Adding Aux input to older car stereo

Discussion in 'General Electronics Discussion' started by zemonti, Oct 1, 2016.

  1. zemonti

    zemonti

    1
    0
    Oct 1, 2016
  2. Externet

    Externet

    710
    145
    Aug 24, 2009
    You must identify which IC manages the audio selection path.
    If you do not have a schematic, search the data sheets of each IC of about 18 pins that you see on the printed board and come back with the number, to explain where to inject an auxiliar signal.

    Another way is to identify the IC that controls the volume gain and use a stereo cancelling jack on the front panel or wired coming trough the stereo back.

    ----> http://www.spridgetguru.com/TA0041_files/droppedImage_2.jpg

    ----> http://www.kawal.net/jack wiring 2.jpg

    Now, if you are lucky...

    ----> https://duckduckgo.com/?q=aux+input++mitsubishi+endeavor&t=canonical&ia=web
     
    Last edited: Oct 4, 2016
  3. GuberX

    GuberX

    8
    0
    Oct 9, 2016
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-